UNI Fan AL

  • Simple assembly with interlocking and daisy chain functionality
  • Only two cables required for a cluster of fans
  • Aesthetic look with aluminum medallion and LEDs on both sides
  • Customized LEDs on fan blades and the inner edge of the fan frame
  • Multiple lighting effects/fan speed control via L-connect software
  • Improved static pressure and airflow while remaining silent

Daisy-Chain Design

Better Performance

Multiple-lighting Combinations

L-Connect 2 Software

PWM ARGB Fan

Brushed aluminum trim

AVAILABLE IN TWO COLORS

White

Black

MODULARITY FAN

Simply daisy chain the fans together with the slide-in interlocking system to pass the signals through the pin-to-pad contact. Users can choose to go with a single fan or link up to 4 fans in a group, and operate each group with just 2 cables.

BETTER PERFORMANCE

Compared to UNI FAN SL120, AL120 has better performance in air flow(64.5 CFM), noise levels(17 ~ 28.3 dB) and static pressure(2.62 mmH2O).

al120-03_c1

ENDLESS LIGHTING EFFECT COMBINATIONS

The ARGB LEDs are located at the inner fan blade and the four corner edges of the fan frame.

Users can set both the fan blade lighting effects and the fan frame inner edge lighting effects separately, or go with the built-in combined lighting effects.

Option 1. Set the fan blade and inner fan frame lighting modes individually to achieve a custom look.

Option 2. Select the combining lighting mode

RAINBOW
STATIC COLOR
BREATHING COLOR
TAICHI

COLOR CYCLE
WARNING
VOICE
SPINNING TEACUPS

TORNADO
MIXING
STACK
STAGGERED

TIDE
SCAN
SCAN-SYNC
CONTEST
CONTEST-SYNC

L-CONNECT 2 SOFTWARE TO CONTROL AL120

Perfectly control and preview the lighting effect of the AL series with L-Connect 2 interface.

Note: For SL users, please install L-Connect & L-Connect 2 Guidebook and follow steps.

ADJUST THE SPEED OF EACH FAN GROUP

Perfectly control and preview the lighting effect of the AL series with L-Connect 2 interface.

Fan Speed: 800 RPM – 1900 RPM
Users can set the fan speed of each group of UNI FANs manually or set it at PWM to let the motherboard control the speed.

Note: Please set the fans at PWM mode in BIOS.

SET PERSONALIZED LED MODE AND COLOR

Designed for AL120, users can choose to set their personalized lighting effect through L-Connect 2. Thousands of combinations can be accomplished.

CONTROL UP TO 16 FANS IN ONE GO

The exclusive controller (UNI HUB) for the AL series that can connect up to 16 fans is included in the 3 pack.

Note: Do not use SL controller for AL120

MANAGE UP TO 64 FANS

L-Connect 2 can now manage a maximum of 4 controllers at a time, allowing users to control 64 fans within the software.

DAZZLING AT ALL ANGLES

Brushed aluminum trim with reflecting edges on both sides of the fan frame.

Rear metallic medallion at the center with cables hidden in X-style fan support.

Aesthetic details considered for both intake and outtake mounting in the case.

AVAILABLE IN TWO KINDS OF PACKAGING

3 Pack

Single Pack

NOTE

To fully control up to 16 UNI FAN (4 fans each cluster) in one go either through the built-in L-Connect2 software or the motherboard software, users must use the designated UNI FAN controller included in the AL120 3 pack . Please note that the single pack version does not contain this controller and thus we recommend users to purchase at least one AL120 3 pack for their build.

NOTE

“UNI HUB” requires the PWM signal while performing PWM mode on L-Connect2. Please enter your MB BIOS and check the fan header is at PWM mode. DC mode or any other mode will not be detected by the UNI HUB.

**Update your MB BIOS system if necessary.

Please note that below radiators are known not compatible with UNI FAN.

1.ARCTIC Liquid Freezer II Series
2.CORSAIR iCUE H115i RGB PRO XT Liquid CPU Cooler
3.CORSAIR Hydro Series™ H110i GT 280mm Extreme Performance Liquid CPU Cooler

Please check the rules to see if UNI FAN can be assembled on a specific radiator.

Rule 1. The tubes of the radiator must avoid the tenon of the UNI FAN and be at the safe area, which is in grey at above picture.

Rule 2. The screw holes between the two fans must be 15mm width on the radiator for either 120mm or 140mm UNI FAN.

SPECIFICATIONS

Product Name UNI FAN AL120
Model AL120-3B AL120-1B AL120-3W AL120-1W
Color Black White
Number of fans 3 1 3 1
Controller Yes No Yes No
Material PBT/PC/Aluminum
Fan Dimension 120 X 120 X 25mm
Rated Voltage DC 12V (FAN) & 5V (LED)
Fan Speed 800~1900 RPM
Air Pressure 2.62 mmH2O (Maximum)
Airflow 64.5 CFM (Maximum)
Acoustic Noise 17 ~ 28.3 dB
Locked Current >= 50mA
Bearing Type Fluid Dynamic Bearing (FDB)
Operation Voltage DC 12V & 5V
Start-Up Voltage DC 6.0V
Input Current 0.22A(FAN) / 0.66A (LED)
Input Power 5.94Watt
Warranty 2 years